
Atlas Roofing's new Summit 60 Synthetic Overlayment has been introduced. For the next two weeks, the company is donating $2 from every roll of the underlayment sold to the Susan G. Komen foundation, which supports breast cancer research. Contractors can order special pink-colored rolls through Atlas Roofing distributors. They will come with pink ribbons and branding.
Summit 60 is a great option for roof systems that have a slope of 4:12 to 7.12 degrees. If you want double coverage, use an underlayment 24” in thickness and fasteners through both layers. The overlapping is necessary because the underlayment needs to be secured by a tarpaulin, which is an unsightly sag. Installing Summit 60 will help protect your deck and prevent damage from water.

The Summit 60 underlayment has an excellent moisture barrier. Its water resistance, UV protection, and waterproofing will keep your roof system safe from water and ice. It stops water from leaking through the decking. It is made from polymeric scrim that is more durable than regular felt. It also provides enhanced strength and minimizes slippage between the underlayment and the roof sheathing. Summit 60 offers additional benefits, including enhanced walking during installation and sixty day UV protection.
Before you install any underlayment, it must be properly installed. It is important to determine the type and size of your roof deck. If your roof deck is ventilated, you can then install Summit (r-60). If your slope is either 4:12 or 7, you can install Summit (r 60) in a double-coverage manner. This means that overlaps between layers should not exceed 24 inches. To avoid leakage and rot, be sure to use plastic cap fasteners with a minimum of one inch diameter and one inch length.
Summit 60 is designed for roof systems that have a shorter lifespan and to prevent water and UV penetration. It is highly resistant to water and UV protected. It reduces slippage in between the roof sheathing (underlayment) and it. The underlayment is durable and will last for a long time. It also offers excellent walking ability. It is also UV-coated so that it has greater strength and endurance.

Summit (r. 60) should be applied before the synthetic underlayment is applied. This is a double-coverage technique. This means that you must ensure that the sheets are properly installed. An ideal length for overlapping is 24 inches, not four. The layers can be adhered with adhesives. Summit (r-60) must only be installed by licensed roof contractors.
FAQ
What should you consider when buying your next home?
You need to ensure you have enough funds available to cover closing costs before you buy a home. Refinancing your mortgage might be an option if you don’t have enough cash.
How do I select a competent contractor?
Ask family and friends to recommend contractors. Also, look at online reviews. Make sure that the contractor you choose has experience in the area of construction that you are interested in. Get references from other people and review them.
Are permits required to renovate my home?
Yes. Permits will be required for any home-improvement project. In most cases you will need to have a building permit along with a plumber's permit. You may also need a zoning permit depending on the type of construction you are undertaking.
How can I quickly sell my house without having to pay any realtor fees?
It is important to start looking for buyers as soon as possible if you wish to quickly sell your home. This means you need to be open to any offer the buyer makes. But, you may lose potential buyers if your wait is too long.
Should you do floors or walls first?
It's important to know what you want to accomplish before you start any project. It is important to consider how you will use the space, who it will be used for and why. This will help decide if you want flooring or wallcoverings.
You can choose to put flooring in the first place if you decide to open up your kitchen/living space. Wall coverings can be used if the intention is to keep this area private.
What room should I remodel first?
The heart of any house is the kitchen. It is where you spend your most time cooking, entertaining, eating, and relaxing. So if you are looking for ways to make your kitchen more functional and attractive, start there!
A bathroom is an essential part of every home. You can relax in your bathroom and take care of daily tasks like bathing, brushing your teeth and shaving. You can improve the function and appearance of these rooms by adding storage, installing a bathtub instead of a bath, and replacing outdated fixtures with moderner ones.
How many times should I change my furnace filter?
How often your family expects to use the heating system in their home will determine the answer. If you plan to leave your house for long periods of time during cold weather months, you may consider changing your filter more frequently. You may be able wait longer between filters changes if you don't often leave the house.
A typical furnace filter lasts approximately three months. This means you should change your furnace filters once every three months.
The manufacturer will also give you recommendations on when to change your filter. Some manufacturers recommend that you replace your filter after every heating season. Others suggest waiting until there are visible dirt deposits.
Statistics
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
External Links
How To
Are you renovating the exterior or interior first?
Which one should i do first?
There are many factors that you should consider when choosing the right project. Most people consider whether the building is new or old. There are many factors to consider if the building is older, such as its roof, condition, windows, doors and flooring. When the building is new, there are many things to consider such as its location, size, number, style, and so forth.
If your building is very old, you should first look at its roof. If it looks like the roof could collapse any minute now, you may want to start on the renovation. Next, you can check if your roof is okay. Next, take a look at the windows. If they are broken or dirty, then you might want them replaced before doing much else. After that, you can go through all the doors to make sure they are clear of any debris. Next, check that everything seems to be in order before you begin work on the floors. Be sure to ensure that the flooring is stable and strong so that you can walk on it without slipping. These steps will be completed before you can proceed to the walls. Check the walls for cracks and damage. If the wall appears to be in good shape, you can continue to the next steps. Once the walls have been checked, you can begin to work on the ceiling. Make sure the ceiling is sturdy enough to withstand whatever weight you place on it. If everything checks out, then you can move forward with your renovation.
If the building was new, you will want to inspect the exterior. Start by looking at the outside. Is it maintained well? Are there cracks or holes? Does it look good overall? If the exterior doesn't look great, then you should definitely fix it. You don’t want to make your home look bad. Next, inspect the foundation. The foundation should be inspected for weakness and repaired. Also, make sure to inspect the driveway. It should be flat and smooth. If it's not, then you should fix it. Also check the sidewalk when you are checking the driveway. If it's uneven, then you should probably replace it.
These areas should be checked before you move on to the inside. Look at the kitchen first. Is the kitchen clean and well maintained? If it is messy, then you should probably clean it up. Next, inspect the appliances. These appliances should be in top shape and functioning properly. If they are not in good condition, you should either purchase new cabinets or fix them. You can then inspect the cabinets. You can paint them if the cabinets are stained or damaged. If they are in good order, you can move onto the bathroom. Check the toilet in here. If it leaks, then you should probably get a new one. If the item is only dirty, you can wash it. Next, check out all the fixtures. Make sure that they are clean. If they're dirty, you need to clean them. The countertops should be inspected as well. If the countertops are cracked or chipped, you might want to repaint them. You should seal them if they are shiny and smooth.
Last, check the furniture. You should make sure nothing is broken or missing. You should find what is missing if it is not there. If something is broken, then you should probably repair it. Once everything is checked, then you can move back outside and finish the job.